Този електрически нагревател е проектиран за връзка с термопомпа Fighter 2020/2025.


NIBE стартира NIBE Uplink, най-бързият, опростен и ефективен инструмент, за да Ви осигури пълен контрол над Вашата отоплителна инсталация.

За повече информация>>


VVM 300 е проектиран за използване с термални водни системи и е пряко пригодена за свързване с въздух / вода термопомпа за отопление въздух / вода  NIBE F2025.

VVM 300 е оборудван с блок за управление, което го прави по-икономичен, тъй като контролира интегрирания нагревател (макс. 13.5 kW) и компресора в Fighter 2005/2020.

VVM 300 е оборудван с контейнер за гореща вода (170 л), както и с контролер на климата и автоматичен байпас.

Image: Котли NIBE/Продуктова гама - Електрически бойлери/NIBE™ VVM 300

NIBE VVM 300 is an electric boiler designed for houses with water borne heating. It consists of a double jacketed pressure vessel, two immersion heaters and intelligent controls. NIBE VVM 300 is designed for connection and communication with outdoor heat pump NIBE FIGHTER 2005 and NIBE F2025 of 8 kW and 10 kW.

NIBE VVM 300, together with NIBE FIGHTER 2005, NIBE F2025 creates a complete heating and hot water unit. VVM 300 is equipped with a control box that currently makes it the most economical operator, regarding both for the integrated immersion heaters (max 13.5 kW) and compressor operation in NIBE FIGHTER 2005, NIBE F2025.

VVM 300 comes complete with an automatic by-pass, three way valve, circulation pumps, and safety equipment. VVM is designed for simple connection to FIGHTER 2005/2020.

VVM 300 controls FIGHTER 2005/2020, which runs with floating condensation towards the heating system.

If FIGHTER 2005/2020 cannot meet the heating requirement, additional heat is shunted in from VVM 300. When the outside temperature drops below the set stop temperature VVM 300 engages and takes over the heating.

VVM 300 is easy to install. All pipe connections are easily accessible. This is especially useful for the replacement market.

VVM 300 is equipped with a complete set of valves, consisting of a drain valve, filling valve, vacuum valve, non-return valve, and safety valve for the water heater section. The boiler section is equipped with a drain valve, filler valve and safety valve. In addition, the unit is equipped with climate controlled automatic bypasses with outdoor and flow sensors, shunt valve, circulation pump and expansion vessel.

VVM 300 is equipped with an intelligent control. This makes for easy operation at the same time as always enabling the electric boiler to run as efficiently as possible. The control also manages the automatic bypass and circulation pumps. Current temperatures and set values can be shown on the display.

The insulation consists of moulded, freon-free polyurethane which is equivalent to approximately 70 mm mineral wool.

The outer casing is of white powder coated steel plate. The upper and lower front covers are attached by catches to facilitate removal.

Image: Котли NIBE/Продуктова гама - Електрически бойлери/NIBE™ VVM 300
Height (excl. foot 15 – 40 mm) 1880 mm
Required ceiling height 2000 mm
Width 600 mm
Depth 615 mm
Weight 160 kg
Volume double jacket 125 liters
Volume, hot water heater 155 liters
Max output immersion heater (1x230 V 50 Hz) 6 kW
Max output immersion heater (3x400 V 50 Hz) 13,5 kW

Rights to make any design modifications are reserved.

Declaration of conformity

VVM 300

Declaration of conformity

Valid from 2010-04-29 to 2030-01-01

pdf PDF: 0804-2.pdf